GDM6-3DX,NO-STOP, PAPER CONNECTING, PAPER STRAW MAKING MACHINE, STAINLESS STEEL, DUST & PROTECTING COVER

Winding different layers paper strip into paper tube with glue.
Multi-cutting knife system, by servo tracking, cut paper tube into small piece of paper drinking straws.
Material: food grade white craft paper and food grade glue.
Sub-raw material: may need oil for lubrication and cooling. White mineral oil.
Standard electric power: 380V/ 3phase/ 50Hz, could change by special requirement.

Product Details

1. Working Principle and short introduction:

Winding different layers paper strip into paper tube with glue.

Multi-cutting knife system, by servo tracking, cut paper tube into small piece of paper drinking straws.

Material: food grade white craft paper and food grade glue.

Sub-raw material: may need oil for lubrication and cooling. White mineral oil.

Standard electric power: 380V/ 3phase/ 50Hz, could change by special requirement

Electric consumption: Rated power, 6.15KW/h

FLA( Full load amp): 13.5A


Capacity:

How many pieces straw per minute. For example: 45m/min, making 6*197mm straws. Consider some waste, we use 225mm for calculating. 45*1000/200=225 pcs/minute.

How to judge the output speed: For 6 cutting blade model, 50m/min output speed, 5*197=985mm, nearly 1 meter. The cutting system need drop off nearly 50 times per minute in videos.

U could set total paper tube length in panel. 5*197=985mm. When paper tube arrives 985mm, the cutting blade drop down and cut into straws.It’s better to set 1000mm for paper tube length, waste a little at end to make last straw the same length with other straws.

Remark:

The speed above is paper tube output speed, not paper feeding speed. Some company use paper feeding speed to attract customer on YouTube.

To get a good quality and stable & no stop working, we suggest use a slower speed.


Technical Parameter
Paper layer2~4 layersFixed lengthEnbcoder
Inner diameter6~12mmOperator1~2 staff
Thickness0.3~1mmSpeed controlServo motor
Speed0~60m/minPower supply380V/ 3 phase/ 50Hz
Cutting length120~1050mmGlue methodThree layer spray type
Way of GluingSingle/double sideWeight1350kg


2. Glue station with heating function:

1) When workshop temperature low, cold, you could open heating function.

2) Glue tray could automatic up and down with a separate motor.


Online Inquiry

If you have any enquiry about quotation or cooperation,please feel free to email us at gdxs01@chinagaoda.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Need to make an enquiry?

Related Products